Model CE2000-60 CE2000-120 CPU 16-bit Configuration Grit-rolling cutting plotter Drive Digital Servo Maximum cutting area 584 mm x 50 m 1220 mm x 50 m Guaranteed accuracy cutting area 584 mm x 5 m*1 1220 mm x 5 m *1 Compatible media widths Minimum: 50 mm; Maximum: 712 mm (28 inches) Minimum: 85 mm; Maximum: 1346 mm (53 inches) Maximum cutting speed 60 cm/s 100 cm/s *2 Specifiable speeds 1 to 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60 cm/s Maximum media thickness 10 mil (0.25 mm) Cutting force 20 to 300 gf, specifiable in 31 steps 20 to 450 gf, specifiable in 39 steps Minimum character matrix Approx 5 mm x 5 mm (alphanumeric characters, varies with the film and font) Mechanical resolution 0.005 mm Programmable resolution GP-GL: 0.1, 0.05. 0.025. 0.01 mm HP-GL*3 emulation: 0.025 mm Repeatability Within 0.1 mm/2 m *1 Number of cutters/pens 1 Blade types Cutter blade: Supersteel; Pen: water-based fibertip Pen types Water-based fibertip Film types High-performance and intermediate cast and calendered self-adhesive vinyl film, fluorescent film, and reflective film, all up to 0.25 mm thick Interfaces RS-232C serial and Centronics parallel (auto interface recognition) Buffer capacity 2 MB Command sets GP-GL and HP-GL*3 emulation (control panel selectable) LCD display 16-characters x 2 rows; in 6 languages Power Supply 100 to 120 VAC; 220 to 240 VAC, 50/60 Hz; auto switching Consumption Within 80 VA Within 120 VAC Operating environment +10°C to +35°C; 35% to 75% RH (non-condensing) Guaranteed accuracy operating environment: +16°C to +32°C; 35% to 70% RH (non-condensing) External dimensions in mm Approx. 851 (W) x 278 (D) x 227 (H) mm Approx. 1489 (W) x 656 (D) x 1189 (H) mm (including stand) Weight Approx. 13 kg Approx. 46 kg (including stand)