Model JX2150 (60-in model) JX2100 (42-in model) Printing method Color thermal inkjet system Printing resolution 1200 x 1200 dpi (monochrome), 600 x 600 dpi, 300 x 300 dpi Ink type Dye-based ink; UV (pigment) ink Both ink types are water-based User can switch between the two ink types Ink capacity 410 cc per printhead; 820 cc if dual-printhead assemblies are used Printhead assembly configuration 4-color high-speed printing: CYMK x 2 sets 4-color normal printing: CYMK x 1 set Job-specific printing: dye-based ink CYMK x 1 set, UV ink CYMK x 1 set (Two different ink types cannot be used at the same time, however) Max. printing/cutting width (Expand mode) Print mode: 1514 mm x 30 m Cutting mode: 1514 mm x 50 m Print mode: 1056 mm x 30 m Cutting mode: 1056 mm x 50 m Media sizes Print mode Inch-based roll media 24, 30, 36, 42, 48, 50, 54, 60 inches Inch-based roll media 24, 30, 36, 42 inches Cutting mode Inch-based roll media 15, 24, 30, 36, 42, 48, 50, 54, 60 inches Cut sheets (including left-over pieces) 141 to 1524 mm Inch-based roll media 15, 24, 30, 36, 42 inches Cut sheets (including left-over pieces) 141 to 1067 mm Cutting media Marking film up to 0.25 mm thick (vinyl, fluorescent, reflective), high-density reflective sheets (subject to certain conditions) Roll media core diameters 2-inch, 3-inch Cutting mode output length Guaranteed accuracy length: 10 m *1 Parameter length: 50 m Accuracy Print mode Distance: Within ±0.3 mm or ±0.2 % if the specified distance, whichever is larger Cutting mode Repeatability: Within 0.1 mm per 2-m length Mechanical resolution 0.005 mm Command formats Print mode HP-RTL (tm) Cutting mode HP-GL (tm), GP-GL Cutting functions * Maximum cutting speed: 900 mm/s (axial direction) * Cutting force: 10 to 350 gf (35 steps) * Minimum character matrix: 3 mm x 3 mm for alphanumeric characters (when using CB09U blade) Adjustment functions Detection of registration marks *2, Manual axis adjustment, Distance adjustment Pint and CCtt alignment accuracy Within 0.5 mm Media takeup function Print mode only Media takeup direction specifiable as printed side in or out (printed side in may not be specifiable for certain media types) Interfaces Centronics (ECP mode), RS-232 standard, 100Base-TX/10BASE-T optional Power Supply 100 to 120 VAC, 200 to 240 VAC, 50/60 Hz; auto-switching Consumption 250 VA when 100 to 120 VAC; 260 VA when 200 to 240 VAC Operating environment Print mode +15°C to +30°C; 35% to 75% RH (non-condensing) Cutting mode +10°C to +35°C; 35% to 75% RH (non-condensing) Guaranteed accuracy operating environment: +16°C to +32°C; 35% to 70% RH (non-condensing) External dimensions in mm 2673 (W) x 723 (D) x 1378 (H) 2213 (W) x 723 (D) x 1378 (H) Weight 110 kg 96 kg Packaged dimensions in mm 2770 (W) x 750 (D) x 1080 (H) 2310 (W) x 750 (D) x 1080 (H) Packaged weight 166 kg 148 kg