Our House on Fire
Materials:
Cardboard box, wrapping paper, crepe paper, split pins, two bulbs, four batteries, two bulb holders, one battery holder, wires, insulating tape.
Method:
We used the cardboard box to make the house. We used wrapping paper to cover the house and then we used silver wrapping paper to cover the roof we used red and yellow crepe paper to make it look like flames coming out of the windows. We used two light bulbs each one hanging from the ceiling and we made our house on fire.
Making our Circuit:
We used a battery holder that held four batteries. We connected a wire to the bulb holder and from that we connected another wire to the other bulb holder with the same wire we stuck it to the split pin. We wired two bulbs together and then we wired one of the bulbs to the battery then from the batteries we stuck it to the pin, and the other bulb to another pin.
How to use the house on fire:
The pin that is stuck in the door will make the house light if you touch the pin off the other pin that is on the right hand side of the house.
by C, K, J.