COMMERCIAL DOORS - 592 Series The Thermacore 592 Series insulated steel sectional door is the premier insulated sectional door in the world today.
Features No CFC's or HFFC's Our unique polyurethane foam contains no environmentally damaging CFC's or HCFC's. No loss of Thermal Efficiency The polyurethane foam in the 592 Series is completely encapsulated in non-permeable materials, preventing loss of thermal efficiency over time. Energy Efficient The 592 Series has an exceptional panel R-Value of 17.50, U-Valve of .057. Repairability Special internal construction provides the ability to field-cut sections for timely and easy replacement. Heavy-Duty Fixtures Track and hardware on the 592 Series have been designed to hold the door tightly to the opening to minimize energy loss. Windload Applications The 592 Series, with its exceptional panel strength, is the door to choose for windload applications. Technical Specifications :
|
Commercial Electric Operators : Overhead Door Corporation manufactures an extensive line of commercial/industrial electric door operators and accessories. Models SEL and JST are recommended for the 592 Series door. Model SEL- The Model SEL is a heavy-duty operator designed to operate standard torsion spring vehicular doors up to 850 pounds. Maximum height for standard doors is 18'. Model JST- The Model JST is a heavy-duty operator designed to operate standard torsion spring vehicular doors up to 1400 pounds. Maximum height for standard doors is 21'.
All Commercial Operators feature low voltage controls, manual override, chain hoist and safety clutch as standard. Commercial Sectional Doors are also available as fully glazed doors for showrooms and fire station applications. |
L+ Side Mount Plus The Model L+ Plus heavy duty commercial operator is designed to operate standard torsion spring vehicular doors to approximately 425sq. ft., with a maximum door height of 25'11". The Model L+ plus is UL listed, and available in trolley or side and centre mount units.
Features :
Operator Control Options Push-button control stations Overhead Door Corporation offers push-button control stations for almost every application. Control stations include standard three-button OPEN-CLOSE-STOP, flush and surface-mounted stations with one to three push-buttons for interior and exterior installations. Key switches are also available with or without stop button. Entrapment Protection All electric powered doors that are controlled by other than an OPEN-CLOSE-STOP or constant contact station within sight of the door, must have an entrapment protection system, either internal or external, that will stop or reverse a closing door if the door path is blocked by an object. This is required by UL 325 and by some state OSHA inspectors. Electric Sensing Edge The Electric Sensing Edge consists of metal foil contact strips mounted to opposing surfaces on a hollow, compressible foam rubber material. This is enclosed in a vinyl-coated nylon moisture barrier, extending the full width of the door. Upon contact with an obstruction, the contact strips touch together, which stops or reverses the doors downward travel. A four-wire sensing edge can be provided which indicates when the sensing edge system has failed or has contacted an obstruction. Pneumatic Sensing Edge The Pneumatic Sensing Edge consists of a combination compressible Neoprene weatherseal and sealed air chamber, extending the full width of the door and securely fastened to the edge of the door. Minimal change in the air chamber pressure, caused by contact with an obstruction, will activate the electric switch which stops or reverses the door's downward travel. (Can be used on doors up to 18' in width) Photoelectric Sensors These produce a non-visible beam across the door opening. An object in the path of the door will block the beam, which will activate a switch that stops or reverses a door's downward travel. |
